2013 Specialized Stumpjumper HT Marathon Carbon 29er M/17.5
SOLD! – DON’T WAIT ON THIS Specialized Stumpjumper because the bike will be listed on eBay if not sold locally by Friday, October 7th!
This has been an awesome bike! I purchased it to race in the 2013 MTB Nationals but it’s never seen a race or muddy conditions. Minimal surface scratches from normal wear and tear. The original Specialized saddle listed below will be swapped out to replace my Terry saddle that’s in the pictures. Tires are a bit worn so I’ll throw in a brand new pair of Small Block 8 29×2.1 tires. Brakes upgraded to SRAM Guide RS. Pedals and computer not included. Upgraded seat post to KS Lev 272 DROPPER POST is INCLUDED! Bike’s retail was $4,900. Asking $2,500 including dropper post, new saddle and new tires.
Here’s what Specialized has to say about this 2013 Stumpjumper…
The Stumpjumper HT Marathon Carbon is built for speed and efficiency. With a 100mm-travel Rock Shox SID Brain fork and SRAM X0/X9 2×10 drivetrain, it’s competition-ready off the showroom floor.
FACT 8m carbon with 12K finish, 29″ geometry, FACT IS construction, tapered HT, carbon PF30 BB, hollow carbon dropouts, replaceable alloy derailleur hanger
FORK – Custom RockShox SID 29 Brain, inertia valve damper, air spring, tapered alloy steerer, top-mount Brain Fade and rebound adj., QR, 15.5″: 80mm, 17.5/19/21″: 90mm travel
HEADSET – 1-1/8 and 1-1/2″ threadless, Campy style upper with 1-1/2″ lower, cartridge bearings
STEM – Specialized XC, 3D forged alloy, 4-bolt, 31.8mm clamp, 6-degree rise, S: 75mm, M: 90mm, L: 100mm, XL: 110mm
HANDLEBARS – S-Works XC Carbon flat bar, uni-directional carbon, 680mm wide, 8-degree backsweep, 31.8mm
GRIPS – Twist grip
FRONT DERAILLEUR – SRAM X9, 10-speed, 34.9 clamp, dual pull
REAR DERAILLEUR – SRAM X0 Type 2, 10-speed, mid cage
SHIFT LEVERS – SRAM X0, 10-speed, twist
CASSETTE – SRAM PG-1050, 10-speed, 11-36
CHAIN – KMC X10, nickel plate, reusable Missing Link
CRANKSET – Custom SRAM carbon S-2200, 10-speed XC double, PF30 spindle, removable spider, 175mm
CHAINRINGS – 38/24
BOTTOM BRACKET – SRAM PF30, OS press-in bearing, sealed cartridge
RIMS – Roval Control Carbon 29, carbon disc, 27mm wide, 32h
FRONT HUB – Roval Control Carbon 29, OS28 end caps, QR, 32h
REAR HUB – Roval Control Carbon 29, DT Swiss alloy cassette body, QR, 32h
SADDLE – Body Geometry Phenom Expert, hollow TI rails, 143mm
SPOKES – DT Swiss Super Comp, 2.0/1.65/1.8 stainless
SEAT BINDER – Specialized 7050 hard anodized alloy, 32.6mm, single bolt
NOTES – Protective clear coat, derailleur hanger, owner’s manual
CHANGES/UPGRADES to the Specialized Stumpjumper :
BRAKES – SRAM Guide RS
FRONT/REAR TIRES – Kenda Nevegal 29×2.2
SEATPOST – KS Lev 27.2 dropper post
Leave A Comment
You must be logged in to post a comment.